Standard Data >> By Keyword [D 3517], >>>Search Results - Total [ 781 ] data were found.
BS(British Standards)
BS534 / Steel Pepes Fittings and Specials for Water and Gas and Sewage /BS778 / Steel Pipes and Joints for Hydraulic Purposes .....
DIN(Deutsches Insititut for Normung)
DIN1615 / Welded Circular Unalloyed Steel Tubes Not Subject To Special Requirements.....
KS (KOREA STANDARD)
KS D 3507 Carbon Steel Pipes for Ordinary Piping (SPP ZINC WATER)....
A 226 / SA 226 / Elecrtic Resistance Welded Carbon Steel Boiler and Superheater Tubes for High Pressure Service
ASTM A 226M-88/ASME SA 226/ELECRTIC RESISTANCE WELDED CARBON STEEL BOILER AND SUPERGEATER/TUBES FOR HIGH PRESSURE SERVICE/1.1 This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel, boiler and superheater tubes for high-pressure service./

ASTM / ASME B36.10M-1985 AMERICAN STANDARD/AMERICAN SOCIETY of MECHANICAL ENGINEERS WELDED AND SEAMLESS WROUGHT STEEL PIPE
American National Standard for Welded and Seamless Wrought Steel Pipe
(ANSI/ASME B36.10m-1985)1
ASTM A135 / ASME SA135 / Pipe Steel Electric Fusion(ARC) Welded
ASTM A135-89a / ASME SA135-89a PIPE STEEL ELECTRIC FUSION(ARC) WELDED(ASTM A 135-89 a / ASME SA 135-89 a /ASTMA135-89a/ASMESA135-89a)This standard is issued under the fixed designation A 135; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( ε) indicates an editorial change since the last revision or reapproval.This specification has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for specific year of issue which has been adopted by the Department of Defense.
B 241 / SB 241 / Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM B-241 / ASME SB-241 /SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY SEAMLESS PIPE
AND
SEAMLESS EXTRUDED TUBE /This specification covers aluminm and aluminum-alloy seamlesspipe in the alloy (Note 1) and tenpers shown in Table 2 [Table 2M] and extruded roind reamless tube in the alloys and tempers shown in Table 3 [Table 3M] intended for pressure applicaoins.The standard sizes for seamless pipe are lidted in Table 16.7 of ANSI H35.2M. Nonstandard alloys, tempers and sizes of pipe are priduced as seamless extruded tube./
BS 3602 PART2 / Steel Pipes and Tubes for Pressure Purposes : Carbon and Carbon Manganese Steel with Speified Elevated Temperature Properties
BS 3602-2 /STEEL PIPES AND TUBES FOR PRESSURE PURPOSES : CARBON AND CARBON MANGANESE STEEL WITH SPEIFIED ELEVATED TEMPERATURE PROPERTIES /PART2-87 SUBMEGRED ARC WELDED TUBES /specification for longitudinally arc welded tubes requirements for plain end tubes
BSI (British Standards Institution)
BS_1 BS Standard No & UNS & etc Standard No Comparative 1 ...........
DIN17176 Seamless circular steel tubes for hydrogen service at elevated temperatures and pressures Technical delivery condition
DIN 17176 Seamless circular steel tubes for hydrogen service at elevated temperatures and pressures
Technical delivery condition

Nahtlose kreisformige Rohre aus druckwasserstoffbestandigen Stahlen; technische Lieferbedingungen

In keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker.

The subclauses marked ● give specifications which are to be agreed upon at the time of ordering, and those marked ●● give specifications which are optional and may be ageed upon at the time of ordering.
GB STANDARD (China Standard)
GB T17395 Seamless Steel Pipe /GB T8162 Structure Pipe 10 20 35 45 40Mn2 45Mn2 27SiMn 20Cr 40Cr 20CrMo 35CrMo 38CrMoA1 50CrV 30CrMnSi
GB STANDARD(China Standard)
GB T17395 Seamless Steel Pipe /GB T8162 Structure Pipe 10 20 35 45 40Mn2 45Mn2 27SiMn 20Cr 40Cr 20CrMo 35CrMo 38CrMoA1 50CrV 30CrMnSi
GOST RUSSIA STANDARD
Smooth Seamless Steel Tubes / Threaded tubes / Welded tubes / Shaped tubes / Methods of tests for tubes / Quality groups of tubes
JIS (JAPAN INDUSTRIAL STANDARD)
STEEL TUBULAR PRODUCTS / STEEL TUBES FOR HEAT TRANSFER / STEEL TUBES FOR STRUCTURAL PURPOSES / STEEL USE
Material standard No. (ASTM Standard)
Material standard No. (ASTM Standard)
3-LAYER COATED PIPE PROCESS
1. Visual Inpection -> 2. Preheating : above the dew pont -> 3. Shot & Grit blasting ...
A 135 / SA 135 / Pipe Steel Electric Fusion(ARC) Welded
ASTM A 135-89a / ASME SA 135-89a/PIPE STEEL ELECTRIC FUSION(ARC) WELDED /1.1 This specification covers two grades of electric-resistance-welded steel pipe in NPS 2 TO NPS 30 inclusive, with nominal (average) wall thickness up to 0.500 in. ( 12.70 mm), inclusive, and in nominal sizes 3/4 to 5 in. (19 to 127 mm) inclusive with nominal (average) wall thickness 0.083 in. (2.11 mm) to 0.314 in. (3.40 mm), depending on size.Pipe having other dimensions 9Note 1) may be furnished provided such pipe complies with all other requirements of this specification. The pipe in intended for conveying liquid, gas, or vapor; and only Grade A is adapted for flanging and bending (Note 2). The suitability of pipe for various purposes in somewhat dependent upon its dimensions, properties, and conditions of service, so that the purpose for which the pipe is intended should be stated in the order. T he pipe may be furnished either nonexpanded or cold expanded, the amount of expansion shall not exceed 1.5% of the outside diameter pipe size./
A 161 / SA 161/ Seamless Low Carbon And Cardon Molybdenum Steel Still Tubes For Refinery Service
ASTM A161 / ASME SA 161/SEAMLESS LOW CARBON AND CARDON MOLYBDENUM STEEL STILL TUBES/FOR REFINERY SERVICE/1.1 This specification covers minimum-wall-thickness, seamless, hot-finished and cold-finished, low-carbon and carbon-molybdenum steel still tubes, for use in carrying fluids at elevated temperatures and pressures in various types of heaters, in which the tubes may be subjected to furnace temperature higher than that of the contained fluid./
A 178 / SA 178 / Eletric Resistance Welded Carbon Steel Boiler Tubes
ASTM A 178 / ASME SA 178/ELETRIC RESISTANCE WELDED CARBON STEEL BOILER TUBES/1.1 This specification covers minimum-wall-thickness, electric-resistance-welded tubes made of carbon steel and carbon-manganese steel intended for use as boiler tubes, boiler flues, superheater flues, and safe ends./
A 179 / Seamless Cold Drawn Low Carbon Steel Heat Exchanger and Condenser Tubes
ASTM A179M-88a / ASME SA 179/SEAMLESS COLD DRAWN LOW CARBON STEEL HEAT EXCHANGER/AND CONDENSER TUBES/1.1 This specification covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus./
B 407 / SB 407 / Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASTM B-407-87 / ASME SB-407 /SPECIFICATION FOR NICKEL-IRON-CHROMIUM ALLOY SEAMLESS PIPE AND TUB/This specification covers UNS N08800, UNS N08801, UNS N08810,and UNS N08811 in the form of cold-worked and hot-finished annealed seamless pipe and tube. Alloy UNS N08810 is normally emloyed in service temperatures up to and including 1100F (593℃). Alloys UNS N08811 are normally employed in service temperatures above 1100F (593℃) where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperatue range./
A 200 / SA 200 / Seamless Intermediate Alloy Steel Still Tubes for Fefinery Service
ASTM A200-89/SEAMLESS iNTERMEDIATE ALLOY STEEL STILL TUBES FOR FEFINERY SERVICE/1.1This specification covers several grades of minimum-wall-thickness, chromium-molybdeumand chromium-mo-lybdenum-silicon,seamless, hot-finished and cold-finished,intermediate alloy-steel still tubes, for use in carrying fluids at elevated temperaures and presures in various types of heaters, in which the tubes may be subjected to a furnace temperature higher than that of the contained fluid./
A 209 / SA 209 / Seamless Carbon Molybdenum Alloy Steel Boiler and Superheater Tubes
ASTM A209M-88 / ASME SA 209/SEAMLESS CARBON MOLYBDENUM ALLOY STEEL BOILER/AND SUPERGEATER TUBES/1.1 This specification covers several grades of minimun-wall-thickness, seamless, carbon-molybdenum alloy-steel, boiler and superheater tubes./
A 210 / SA 210 / Seamless Medium Carbon Steel Boiler and Superheater Tubes
ASTM A210M-88/ASME SA 210/SEAMLESS MEDIUM CARBON STEEL BOILER AND SUPERHEATER TUBES/1.1 This specification covers minimum-wall-thickness, seamless medium-carbon steel, boiler tubes and boiler flues, including safe ends (Note 1), arch and stay tubes, and superheater tubes./
A 211 / SA 211 / Spiral Welded Steel or Iron Pipe
ASTM A 211-85/ASME SA 211/SPIRAL WELDED STEEL OR IRON PIPE/
A 213 / SA 213 / Seamless Ferritic and Aiustenitic Alloy Steel Boiler Superheater and Heat Exchanger Tubes
ASTM A 213M-89a/ASME SA 213/SEAMLESS FERRITIC AND AUSTENITIC ALLOY STEEL BOILER SUPERHEATER AND/HEAT EXCHANGER TUBES/1.1 This specification covers minimum-wall-thickness, seamless ferritic and austenitic steel, boiler and superheater tubes and austenitic steel heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2, respectively./
A 214 / SA 214 / Electric Resistance Welded Carbon Steel Heat Exchanger and Condenser Tubes
ASTM A 214M/ASME SA 214/ELECTRIC RESISTANCE WELDED CARBON STEEL HEAT EXCHANGER/AND CONDENSER TUBES/1.1 This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel tubes to be used for heat exchangers, condensers, and similar heat-transfer apparatus./
A 249 / SA 249 / Welded Austentic Steel Boiler Superheater Heat Exchanger and Condenser Tubes
ASTM A 249M-88b/ASME SA 249/WELDED AUSTENTIC STEEL BOILER SUPERHEATER HEAT EXCHANGER/AND CONDENSER TUBES/1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1, with various grades intended for such use as boiler, superheater, heat exchanger, or condensed tubes./
A 250 / SA 250 / Electric Resistance Welded Carbon Molybdenum Alloy Steel Boiler and Supergeater Tubes
ASTM A 250-89a/ASME SA 250/ELECTRIC RESISTANCE WELDED CARBON MOLYBDENUM ALLOY STEEL BOILER AND/SUPERGEATER TUBES/1.1 This specification covers several grades, designated T1, T1a, T2, T11, T12, and T2, of minimum-wall-thickness, electric-resistance-welded, carbon-molybdenum and chromium-molybdenum alloy-steel, boiler and superheater./
A 252 / SA 252 / Welde and Seamless Steel Pipe Piles
ASTM A252-89/WELDE AND SEAMLESS STEEL PIPE PILES/1.1 This specification covers nominal (average)wall steel pipe piles of cylindrical shape and applies to pipe in which the steel cylinder acts as a permanent load-carrying member, or as a shell to form cast-in place concrete piles./
A 254 / SA 254 /Standard Specification for Copper Brazed Steel Tubing1
ASTM A254/ASME SA254/STANDARD SPECIFICATION FOR COPPER BRAZED STEEL TUBING1/1.1 This specification covers double-wall, copper brazed steel tubing suitable for general engineering uses, particularly in the automotive, refrigeration, and stove industries for fuel lines, brake lines, oil lines, heating and colling units, and the like./
A 268 / SA 268 / Seamless and Welded Ferritic Stainless Steel Tubing For General Service
ASTM A268/SEAMLESS AND WELDED FERRITIC STAINLESS STEEL TUBING/FOR GENERAL SERVICE/1.1 This specification² covers a number of grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and high-temperature service. Most of these grades are commonly known as the "straight-chromium" types and are characterized by being ferromag-netic. Two of these grades, TP410 and UNS S41500 (Table1), are amenable to hardening by heat treatment, and the high-chromium, ferritic alloys are sensitive to notch-brit-tleness on slow cooling to ordinary temperatures. These features should be recognized in the use of these materials.Grade TP439 is used primarily for hot-water tank service and does not require post-weld heat treatment to prevent attack of the heat affected zone./
A 269 / SA 269 / Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A269-88a/SEAMLES AND WELDED AUSTENITIC STAINLESS STEEL TUBING/FOR GENERAL SERVICE/1.1 This specificatioin covers grades of nominal-wall-thickness stainless steel tubing for general corrosion-resisting and low-or high-temperature serviec, as designated in Table 1./
A 270 / SA 270 / Seamless and Welded Austenitic Stainless Steel Sanitapy Tubing
ASTM A270-88a/SEAMLESS AND WELDED AUSTENITIC STAIN#EEE3D5/LESS STEEL SANITARY TUBING/1.1 This specification covers grades of seamless and welded austenitic stainless steel sanitary tubing intended for use in the dairy and food industry and having special surface finishes.
A 312 / SA 312 / Seamless and Welded Austenitic Stainless Steel Pipe
ASTM A312-89a/ASME SA312/SEAMLESS AND WELDED AUSTENITIC STAINLESS STEEL PIPE/1.1 This specification covers grades of minimum-wall-thickness, seamless, hot-finished and cold-finished, austenitic chromium-nickel steel sill tubes as designated in Table 1 for use in carrying fluids at elevated temperatures and pressures in various types of heaters, in which the tubes may be subjected to a furnace temperature higher than that of the contained fluids./
A 333 / SA 333 / Seamless and Welded Steel Pipe for Low Temperature Service
ASTM A 333M-88a/ASME SA 333/SEAMLESS AND WELDED STEEL PIPE FOR LOW TEMPERATURE SERVICE/1.1 This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Sveral graes of ferritic steel are included as listed in Table 1. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect in low-temperature impact properties./
A 334 /SA 334 / Seamless and Welded Carbon and Alloy Steel Tubes for Low Temperature Service
ASTM A 334M-89/ASME SA 334/SEAMLESS AND WELDED CARBON AND ALLOY STEEL TUBES FOR/LOW TEMPERATURE SERVICE/1.1 This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties./
A 358 / SA 358 / Standard Specification for Electric Fusion Welded Austenitic Chromium Nickel Alloy Steel Pipe for High Temperature Service1
ASTM A 358/ASME SA 358/STANDARD SPECIFICATIOIN FOR ELECTRIC FUSION WELDED AUSTENITIC/ CHROMIUM NICKEL ALLOY STEEL PIPE FOR HIGH TEMPERATURE SERVICE1/ 1.1 this specification2 covers electric-fusion-welded austenitic chromium-nickel alloy steel pipe suitable for corrosive or high-temperature service, or both. (Although no restrictions are placed on the sizes of pipe which may be furnished under this specification, commercial practice is commonly limited to sizes not less than NPS 8)./
A 369 / SA 369 / Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High Temperature Service
ASTM A 369M-89/ASME SA 369/CARBON AND FERRITIC ALLOY STEEL FORGED AND BORED PIPE FOR/HIGH TEMPERATURE SERVICE/.1 This specification covers heavy-wall carbon and alloy steel pipe (Note 1) made from turned and bored forgings and this specification shall be suitable for bending and other forming operation and for fusion welding. Selection ill depend in design, service conitions, mechanical properties and high-temperature characteristics./
A 381 / SA 381 / Metal Arc Welded Steel Pipe for USE with High Pressure Transmission Systems
ASTM A 381-89/ASME SA 381/METAL ARC WELDED STEEL PIPE FOR USE WITH/HIGH PRESSURE TRANSMISSION SYSTEMS/1.1 This specification covers straight seam, double-sub-merged-arc-welded steel pipe (Note 1) suitable for high-pressure service, 16 in. (406 mm0 and lager in outside diameter, with wall thicknesses from 5/16 to 1 1/2 in. (7.9 to 38 mm). The pipe is intended for fabrication of fittings and accessories for compressor or pump-station piping. pipe ordered to this specification to this specification shall be suitable for bending, flanging (vastoning), corrugating, and similar operations./
|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|

    Standard Data >> By keyword [D 3517], >>>Search Results - Total [ 781 ] data were found.